AMSAT P3-D Launch Campaign Kourou

The launch campaign started on September 11th with the arrival of the various launch integration team members from Germany, United States, Belgium, Czech Republic and Finland. All photos can be freely re-printed with the copyright notice: "Photo by AMSAT-DL, Wilfried Gladisch". The launch date is currently not earlier than November 14. Official launch date and other informations can be found at http://www.arianespace.com/

Click to see a larger image.

   Zur deutschen Seite
The Centre Spatial Guyanais is where the european ARIANE rocket is launched. 
The technical centre of the CSG with the Jupiter control centre and the musuem. 
The launch area with the S3 buildings for filling operations is about 15km away from the S1 technical centre. 
The S3C building with the AMSAT office in the 2nd floor. 
Peter Gülzow DB2OS (Mission Director for the launch campaign) in daily meetings with Arianespace and CSG officials in the AMSAT Office. 
Safety training for all people working in hazardous areas. 
P3-D arrives at the S3A integration building and filling hall from the BAF. 
The spacecraft, SBS and equipment is moved into the Air Lock of S3A. 
Unpacking of the SBS from it's transport container in the air lock. 
After unpacking and mounting on the rotissery the spacecraft was moved into the filling hall HR2. 
The P3-D spacecraft in the 100.000 class filling hall. The spacecraft preparations, functional testing and filling operations will be performed here. 
Chuck Green N0ADI preparing the IHU-2 (YAHU) with it's YACE camera for installation and testing in P3-D. 
This is the IR-LASER Experiment with the engraved memorial for Werner Haas, DJ5KQ. Unfortunately Werner did not live to see the launch of P3-D. Werner will continue to be with us by his achievements and in our hearts. 
Lou McFadin W5DID working on the flight umbilical cable which let's us talk to P3-D until launch. 
Dick Daniels W4PUJ is ready for the installation of the 400N engine into the spacecraft 
The spacecraft IHUwas powered up and loaded with software. From now on, the IHU will run for ever... 
Leak test of the propulsion system with filling the Helium tank to 200 bar and pressurizing the fuel tanks. 
Functional test of all receivers and transmitters, sensors and all experiments, including RUDAK, IHU-2, GPS, CEDEX, MONITOR, LASER. 
The RF and functional tests continued throughout the whole week. 
Stacey Mills W4SM commanding P3-D to support the RUDAK and RF team during there testing. 

Click here for part 2

Generated on 11/01/00